No products in the cart.
$8.13Conventional Detector Base. 2-Wire. 4” . 24VDC – NS4-100
SKU: 0300-04030 ITThe NS4 base is an electronics free 4″ base featuring a plastic tamper-lock lug. Each base is equipped with a resistor. Models HSC-224R. HSC-220R and the HSC-221R are designed specifically for use with the Hochiki conventional models SLR-24H. SLR-24V. SLV-24. SLV-24N. SLV-24V. SLR-835. SLR-835H. DCD-135/190. The HSC-(X)R series is a 6″ base with two sets of Form “C” relay contacts. Models HSC-224R. HSC-220R and the HSC-221R are also approved for use with Hochiki’s previous conventional model DFE 135/190.
$8.13Conventional Detector Base. 2-Wire. 6”. 24VDC – NS6-100
SKU: 0300-04070 ITThe NS6 base is an electronics free 6″ base featuring a plastic tamper-lock lug. Each base is equipped with a resistor. Models HSC-224R. HSC-220R and the HSC-221R are designed specifically for use with the Hochiki conventional models SLR-24H. SLR-24V. SLV-24. SLV-24N. SLV-24V. SLR-835. SLR-835H. DCD-135/190. The HSC-(X)R series is a 6″ base with two sets of Form “C” relay contacts. Models HSC-224R. HSC-220R and the HSC-221R are also approved for use with Hochiki’s previous conventional model DFE 135/190
$120.65Conventional Zone Input Module for 4″Box. Class A & B – CZM
SKU: 0400-01840The Hochiki Conventional Zone Module (DCP-CZM) is designed for use on an analog addressable Fire Alarm system. Up to 127 devices can be placed on a single SLC loop. The device address is uniquely stored on an onboard. The module allows the panel to interface and monitor two-wire conventional detectors or pull stations. Each DCP-CZM transmits the status on one zone of devices (25 maximum per zone) back to the panel.
$54.20Convetional Photoelectric Smoke Detector – SOC-24V
SKU: 0200-06700The SOC-24V is a reliable. high quality Photoelectric Smoke Detector. It can be used in all open areas where Photoelectric Smoke Detectors are required. including in-duct applications. The computer-designed smoke chamber makes the SOC-24V well suited for detecting smoldering fires as well as fast flaming fires.
$68.65Convetional Photoelectric Smoke Detector – SOE-24V
SKU: 0200-11280The SOE-24V (UL 268 7th edition listed) is the newly developed multi-spectrum smoke categorization technology that detects smoldering and flaming fires fueled by traditional materials and polyurethane while reducing nuisance alarms.
It is a reliable. high-quality multi-criteria Photoelectric Smoke Detector and can be used in all open areas where Photoelectric Smoke Detectors are required.
$3,364.17Cordless Heat Detector Test Kit – Includes Batteries and Charger – SOLO 461 COMPLETE
SKU: 0700-01430Solo 461 is a cordless heat detector tester designed to provide a fast. functional test of heat detectors without risking damage to the detector. The tester uses Cross Air Technology (CATâ„¢) to direct heat horizontally across the test cup directly to the sensor. The universal design suits widest range of detectors (up to 4″ in diameter).
$79.99DH-IPC-HDBW1235EN-W-S2 Dahua 2MP Wi-Fi Camera
SKU: N/ADahua Metal Dome Type IP Camera 1/2.9″ CMOS 2MP @30FPS 2.8mm Lens FOV 100° Wi-Fi IP67 IK10 H.265 IR 30M
$115.29DIGITAL ANALOG MULTI-CRITERIA SENSOR – ACC-V
SKU: 0200-06168The Hochiki ACC-V Multi-Criteria Sensor is articularly suited for detecting smoke produced by a wide range of combustibles found in various applications. Temperature monitoring is achieved by a ther mistor placed for optimum sensitivity. Hochiki’s unique design allows fast response to flaming fires as well as smoldering fires while mini mizing false alarms.
$103.88Door Holder 24/120V Flush Mount. Chrome Finish – DH24120FC
SKU: 0500-01890The Hochiki Electromagnetic Fire Door Holders
$131.94Door Holder 24/120V Surface Mount Chrome Finish DH24120SPC
SKU: 0500-01910The Hochiki Electromagnetic Fire Door Holders
$149.99DS-2CD2543G2-IWS 4MP Mini dome Camera
SKU: N/AHikvision 4MP AcuSense Built-in Mic Fixed Mini Dome Network Camera
$99.99DS-HD2 Hikvision 2MP Smart doorbell
SKU: N/AHikvision 2MP Outdoor Wi-Fi Smart Doorbell Camera
$389.00DS-KIS602 Hikvision 2MP Video Intercom
SKU: N/AHikvision DS-KIS602 2MP HD Modular IP Video Intercom 3-Piece Kit, Includes (1) DS-KH6320-WTE1, (1) DS-KD8003-IME1, and (1) 4-Port Switch. IP-based Video Intercom Kit/Bell, 7-inch Colorful TFT Display, Wide-angle Coverage, Built-in Microphone and Speaker, Echo Cancellation, Waterproof.
$134.06Dual Input Monitor Module for 4″ Box. Class B – DIMM
SKU: 0400-01850The Hochiki Dual Input Monitor Module (DIMM) is designed for use on a UL listed Fire Alarm Control Panel. It provides two independent contact monitoring circuits while only utilizing one address on the SLC loop. Up to 127 devices can be placed on a single SLC loop. The device address is uniquely stored on an onboard.
$115.29Dual Relay Module 2 AMPS – R2ML
SKU: 0400-02050The Dual Relay Modules (R2ML/H Series) have been designed to provide flexible and quick response to emergency conditions. The R2ML/H Series allows independent control of two form contacts for a variety of normally open and normally closed contact applications such as fan operation. elevator recall. door closure. and auxiliary notification.
$699.00EKI-K82T46C Hikvision 8 Channels 4MP Turret PoE Kit
SKU: N/AHikvision Kit NVR 8 Channels 6 IP Cameras
$1,079.00EV8032TURBO-GEN3 DVR
SKU: N/AEpcom Hybrid DVR: Supports 8MP (4K) 32CH TurboHD + 8CH IP POEÂ Video Output 4K/ (ONVIF NVR) 8 SATA Smart Sense Audio by Coaxitron (SUPER LIVE PLUS & SUPERCAM PLUS apps)
$61.67Fast Response Contact Monitoring Module – FRCME-M
SKU: 0400-02580The Hochiki DCP-FRCME-M Fast Response Contact Monitoring Modules are designed to be used with pull stations. water flow switches. and other applications requiring the monitoring of dry contact devices. The interrupt driven Digital Communications Protocol (DCP) combines maximum communication reliability and fast response to emergency conditions. The DCP-FRCMEM contact monitoring module does not require a separate 24 VDC power source.
Conventional Detector Base. 2-Wire. 4” . 24VDC – NS4-100
The NS4 base is an electronics free 4″ base featuring a plastic tamper-lock lug. Each base is equipped with a resistor. Models HSC-224R. HSC-220R and the HSC-221R are designed specifically for use with the Hochiki conventional models SLR-24H. SLR-24V. SLV-24. SLV-24N. SLV-24V. SLR-835. SLR-835H. DCD-135/190. The HSC-(X)R series is a 6″ base with two sets of Form “C” relay contacts. Models HSC-224R. HSC-220R and the HSC-221R are also approved for use with Hochiki’s previous conventional model DFE 135/190.
Conventional Detector Base. 2-Wire. 6”. 24VDC – NS6-100
The NS6 base is an electronics free 6″ base featuring a plastic tamper-lock lug. Each base is equipped with a resistor. Models HSC-224R. HSC-220R and the HSC-221R are designed specifically for use with the Hochiki conventional models SLR-24H. SLR-24V. SLV-24. SLV-24N. SLV-24V. SLR-835. SLR-835H. DCD-135/190. The HSC-(X)R series is a 6″ base with two sets of Form “C” relay contacts. Models HSC-224R. HSC-220R and the HSC-221R are also approved for use with Hochiki’s previous conventional model DFE 135/190
Conventional Zone Input Module for 4″Box. Class A & B – CZM
The Hochiki Conventional Zone Module (DCP-CZM) is designed for use on an analog addressable Fire Alarm system. Up to 127 devices can be placed on a single SLC loop. The device address is uniquely stored on an onboard. The module allows the panel to interface and monitor two-wire conventional detectors or pull stations. Each DCP-CZM transmits the status on one zone of devices (25 maximum per zone) back to the panel.
Convetional Photoelectric Smoke Detector – SOC-24V
The SOC-24V is a reliable. high quality Photoelectric Smoke Detector. It can be used in all open areas where Photoelectric Smoke Detectors are required. including in-duct applications. The computer-designed smoke chamber makes the SOC-24V well suited for detecting smoldering fires as well as fast flaming fires.
Convetional Photoelectric Smoke Detector – SOE-24V
The SOE-24V (UL 268 7th edition listed) is the newly developed multi-spectrum smoke categorization technology that detects smoldering and flaming fires fueled by traditional materials and polyurethane while reducing nuisance alarms.
It is a reliable. high-quality multi-criteria Photoelectric Smoke Detector and can be used in all open areas where Photoelectric Smoke Detectors are required.
Cordless Heat Detector Test Kit – Includes Batteries and Charger – SOLO 461 COMPLETE
Solo 461 is a cordless heat detector tester designed to provide a fast. functional test of heat detectors without risking damage to the detector. The tester uses Cross Air Technology (CATâ„¢) to direct heat horizontally across the test cup directly to the sensor. The universal design suits widest range of detectors (up to 4″ in diameter).
DH-IPC-HDBW1235EN-W-S2 Dahua 2MP Wi-Fi Camera
Dahua Metal Dome Type IP Camera 1/2.9″ CMOS 2MP @30FPS 2.8mm Lens FOV 100° Wi-Fi IP67 IK10 H.265 IR 30M
DIGITAL ANALOG MULTI-CRITERIA SENSOR – ACC-V
The Hochiki ACC-V Multi-Criteria Sensor is articularly suited for detecting smoke produced by a wide range of combustibles found in various applications. Temperature monitoring is achieved by a ther mistor placed for optimum sensitivity. Hochiki’s unique design allows fast response to flaming fires as well as smoldering fires while mini mizing false alarms.
Door Holder 24/120V Flush Mount. Chrome Finish – DH24120FC
The Hochiki Electromagnetic Fire Door Holders
Door Holder 24/120V Surface Mount Chrome Finish DH24120SPC
The Hochiki Electromagnetic Fire Door Holders
DS-2CD2543G2-IWS 4MP Mini dome Camera
Hikvision 4MP AcuSense Built-in Mic Fixed Mini Dome Network Camera
DS-KIS602 Hikvision 2MP Video Intercom
Hikvision DS-KIS602 2MP HD Modular IP Video Intercom 3-Piece Kit, Includes (1) DS-KH6320-WTE1, (1) DS-KD8003-IME1, and (1) 4-Port Switch. IP-based Video Intercom Kit/Bell, 7-inch Colorful TFT Display, Wide-angle Coverage, Built-in Microphone and Speaker, Echo Cancellation, Waterproof.
Dual Input Monitor Module for 4″ Box. Class B – DIMM
The Hochiki Dual Input Monitor Module (DIMM) is designed for use on a UL listed Fire Alarm Control Panel. It provides two independent contact monitoring circuits while only utilizing one address on the SLC loop. Up to 127 devices can be placed on a single SLC loop. The device address is uniquely stored on an onboard.
Dual Relay Module 2 AMPS – R2ML
The Dual Relay Modules (R2ML/H Series) have been designed to provide flexible and quick response to emergency conditions. The R2ML/H Series allows independent control of two form contacts for a variety of normally open and normally closed contact applications such as fan operation. elevator recall. door closure. and auxiliary notification.
EKI-K82T46C Hikvision 8 Channels 4MP Turret PoE Kit
Hikvision Kit NVR 8 Channels 6 IP Cameras
EV8032TURBO-GEN3 DVR
Epcom Hybrid DVR: Supports 8MP (4K) 32CH TurboHD + 8CH IP POEÂ Video Output 4K/ (ONVIF NVR) 8 SATA Smart Sense Audio by Coaxitron (SUPER LIVE PLUS & SUPERCAM PLUS apps)
Fast Response Contact Monitoring Module – FRCME-M
The Hochiki DCP-FRCME-M Fast Response Contact Monitoring Modules are designed to be used with pull stations. water flow switches. and other applications requiring the monitoring of dry contact devices. The interrupt driven Digital Communications Protocol (DCP) combines maximum communication reliability and fast response to emergency conditions. The DCP-FRCMEM contact monitoring module does not require a separate 24 VDC power source.
Conventional Detector Base. 2-Wire. 4” . 24VDC – NS4-100
The NS4 base is an electronics free 4″ base featuring a plastic tamper-lock lug. Each base is equipped with a resistor. Models HSC-224R. HSC-220R and the HSC-221R are designed specifically for use with the Hochiki conventional models SLR-24H. SLR-24V. SLV-24. SLV-24N. SLV-24V. SLR-835. SLR-835H. DCD-135/190. The HSC-(X)R series is a 6″ base with two sets of Form “C” relay contacts. Models HSC-224R. HSC-220R and the HSC-221R are also approved for use with Hochiki’s previous conventional model DFE 135/190.
Conventional Detector Base. 2-Wire. 6”. 24VDC – NS6-100
The NS6 base is an electronics free 6″ base featuring a plastic tamper-lock lug. Each base is equipped with a resistor. Models HSC-224R. HSC-220R and the HSC-221R are designed specifically for use with the Hochiki conventional models SLR-24H. SLR-24V. SLV-24. SLV-24N. SLV-24V. SLR-835. SLR-835H. DCD-135/190. The HSC-(X)R series is a 6″ base with two sets of Form “C” relay contacts. Models HSC-224R. HSC-220R and the HSC-221R are also approved for use with Hochiki’s previous conventional model DFE 135/190
Conventional Zone Input Module for 4″Box. Class A & B – CZM
The Hochiki Conventional Zone Module (DCP-CZM) is designed for use on an analog addressable Fire Alarm system. Up to 127 devices can be placed on a single SLC loop. The device address is uniquely stored on an onboard. The module allows the panel to interface and monitor two-wire conventional detectors or pull stations. Each DCP-CZM transmits the status on one zone of devices (25 maximum per zone) back to the panel.
Convetional Photoelectric Smoke Detector – SOC-24V
The SOC-24V is a reliable. high quality Photoelectric Smoke Detector. It can be used in all open areas where Photoelectric Smoke Detectors are required. including in-duct applications. The computer-designed smoke chamber makes the SOC-24V well suited for detecting smoldering fires as well as fast flaming fires.
Convetional Photoelectric Smoke Detector – SOE-24V
The SOE-24V (UL 268 7th edition listed) is the newly developed multi-spectrum smoke categorization technology that detects smoldering and flaming fires fueled by traditional materials and polyurethane while reducing nuisance alarms.
It is a reliable. high-quality multi-criteria Photoelectric Smoke Detector and can be used in all open areas where Photoelectric Smoke Detectors are required.
Cordless Heat Detector Test Kit – Includes Batteries and Charger – SOLO 461 COMPLETE
Solo 461 is a cordless heat detector tester designed to provide a fast. functional test of heat detectors without risking damage to the detector. The tester uses Cross Air Technology (CATâ„¢) to direct heat horizontally across the test cup directly to the sensor. The universal design suits widest range of detectors (up to 4″ in diameter).
DH-IPC-HDBW1235EN-W-S2 Dahua 2MP Wi-Fi Camera
Dahua Metal Dome Type IP Camera 1/2.9″ CMOS 2MP @30FPS 2.8mm Lens FOV 100° Wi-Fi IP67 IK10 H.265 IR 30M
DIGITAL ANALOG MULTI-CRITERIA SENSOR – ACC-V
The Hochiki ACC-V Multi-Criteria Sensor is articularly suited for detecting smoke produced by a wide range of combustibles found in various applications. Temperature monitoring is achieved by a ther mistor placed for optimum sensitivity. Hochiki’s unique design allows fast response to flaming fires as well as smoldering fires while mini mizing false alarms.
Door Holder 24/120V Flush Mount. Chrome Finish – DH24120FC
The Hochiki Electromagnetic Fire Door Holders
Door Holder 24/120V Surface Mount Chrome Finish DH24120SPC
The Hochiki Electromagnetic Fire Door Holders
DS-2CD2543G2-IWS 4MP Mini dome Camera
Hikvision 4MP AcuSense Built-in Mic Fixed Mini Dome Network Camera
DS-KIS602 Hikvision 2MP Video Intercom
Hikvision DS-KIS602 2MP HD Modular IP Video Intercom 3-Piece Kit, Includes (1) DS-KH6320-WTE1, (1) DS-KD8003-IME1, and (1) 4-Port Switch. IP-based Video Intercom Kit/Bell, 7-inch Colorful TFT Display, Wide-angle Coverage, Built-in Microphone and Speaker, Echo Cancellation, Waterproof.
Dual Input Monitor Module for 4″ Box. Class B – DIMM
The Hochiki Dual Input Monitor Module (DIMM) is designed for use on a UL listed Fire Alarm Control Panel. It provides two independent contact monitoring circuits while only utilizing one address on the SLC loop. Up to 127 devices can be placed on a single SLC loop. The device address is uniquely stored on an onboard.
Dual Relay Module 2 AMPS – R2ML
The Dual Relay Modules (R2ML/H Series) have been designed to provide flexible and quick response to emergency conditions. The R2ML/H Series allows independent control of two form contacts for a variety of normally open and normally closed contact applications such as fan operation. elevator recall. door closure. and auxiliary notification.
EV8032TURBO-GEN3 DVR
Epcom Hybrid DVR: Supports 8MP (4K) 32CH TurboHD + 8CH IP POEÂ Video Output 4K/ (ONVIF NVR) 8 SATA Smart Sense Audio by Coaxitron (SUPER LIVE PLUS & SUPERCAM PLUS apps)
Fast Response Contact Monitoring Module – FRCME-M
The Hochiki DCP-FRCME-M Fast Response Contact Monitoring Modules are designed to be used with pull stations. water flow switches. and other applications requiring the monitoring of dry contact devices. The interrupt driven Digital Communications Protocol (DCP) combines maximum communication reliability and fast response to emergency conditions. The DCP-FRCMEM contact monitoring module does not require a separate 24 VDC power source.
Conventional Detector Base. 2-Wire. 4” . 24VDC – NS4-100
The NS4 base is an electronics free 4″ base featuring a plastic tamper-lock lug. Each base is equipped with a resistor. Models HSC-224R. HSC-220R and the HSC-221R are designed specifically for use with the Hochiki conventional models SLR-24H. SLR-24V. SLV-24. SLV-24N. SLV-24V. SLR-835. SLR-835H. DCD-135/190. The HSC-(X)R series is a 6″ base with two sets of Form “C” relay contacts. Models HSC-224R. HSC-220R and the HSC-221R are also approved for use with Hochiki’s previous conventional model DFE 135/190.
Conventional Detector Base. 2-Wire. 6”. 24VDC – NS6-100
The NS6 base is an electronics free 6″ base featuring a plastic tamper-lock lug. Each base is equipped with a resistor. Models HSC-224R. HSC-220R and the HSC-221R are designed specifically for use with the Hochiki conventional models SLR-24H. SLR-24V. SLV-24. SLV-24N. SLV-24V. SLR-835. SLR-835H. DCD-135/190. The HSC-(X)R series is a 6″ base with two sets of Form “C” relay contacts. Models HSC-224R. HSC-220R and the HSC-221R are also approved for use with Hochiki’s previous conventional model DFE 135/190
Conventional Zone Input Module for 4″Box. Class A & B – CZM
The Hochiki Conventional Zone Module (DCP-CZM) is designed for use on an analog addressable Fire Alarm system. Up to 127 devices can be placed on a single SLC loop. The device address is uniquely stored on an onboard. The module allows the panel to interface and monitor two-wire conventional detectors or pull stations. Each DCP-CZM transmits the status on one zone of devices (25 maximum per zone) back to the panel.
Convetional Photoelectric Smoke Detector – SOC-24V
The SOC-24V is a reliable. high quality Photoelectric Smoke Detector. It can be used in all open areas where Photoelectric Smoke Detectors are required. including in-duct applications. The computer-designed smoke chamber makes the SOC-24V well suited for detecting smoldering fires as well as fast flaming fires.
Convetional Photoelectric Smoke Detector – SOE-24V
The SOE-24V (UL 268 7th edition listed) is the newly developed multi-spectrum smoke categorization technology that detects smoldering and flaming fires fueled by traditional materials and polyurethane while reducing nuisance alarms.
It is a reliable. high-quality multi-criteria Photoelectric Smoke Detector and can be used in all open areas where Photoelectric Smoke Detectors are required.
Cordless Heat Detector Test Kit – Includes Batteries and Charger – SOLO 461 COMPLETE
Solo 461 is a cordless heat detector tester designed to provide a fast. functional test of heat detectors without risking damage to the detector. The tester uses Cross Air Technology (CATâ„¢) to direct heat horizontally across the test cup directly to the sensor. The universal design suits widest range of detectors (up to 4″ in diameter).
DH-IPC-HDBW1235EN-W-S2 Dahua 2MP Wi-Fi Camera
Dahua Metal Dome Type IP Camera 1/2.9″ CMOS 2MP @30FPS 2.8mm Lens FOV 100° Wi-Fi IP67 IK10 H.265 IR 30M
DIGITAL ANALOG MULTI-CRITERIA SENSOR – ACC-V
The Hochiki ACC-V Multi-Criteria Sensor is articularly suited for detecting smoke produced by a wide range of combustibles found in various applications. Temperature monitoring is achieved by a ther mistor placed for optimum sensitivity. Hochiki’s unique design allows fast response to flaming fires as well as smoldering fires while mini mizing false alarms.
Door Holder 24/120V Flush Mount. Chrome Finish – DH24120FC
The Hochiki Electromagnetic Fire Door Holders
Door Holder 24/120V Surface Mount Chrome Finish DH24120SPC
The Hochiki Electromagnetic Fire Door Holders
DS-2CD2543G2-IWS 4MP Mini dome Camera
Hikvision 4MP AcuSense Built-in Mic Fixed Mini Dome Network Camera
DS-KIS602 Hikvision 2MP Video Intercom
Hikvision DS-KIS602 2MP HD Modular IP Video Intercom 3-Piece Kit, Includes (1) DS-KH6320-WTE1, (1) DS-KD8003-IME1, and (1) 4-Port Switch. IP-based Video Intercom Kit/Bell, 7-inch Colorful TFT Display, Wide-angle Coverage, Built-in Microphone and Speaker, Echo Cancellation, Waterproof.
Dual Input Monitor Module for 4″ Box. Class B – DIMM
The Hochiki Dual Input Monitor Module (DIMM) is designed for use on a UL listed Fire Alarm Control Panel. It provides two independent contact monitoring circuits while only utilizing one address on the SLC loop. Up to 127 devices can be placed on a single SLC loop. The device address is uniquely stored on an onboard.
Dual Relay Module 2 AMPS – R2ML
The Dual Relay Modules (R2ML/H Series) have been designed to provide flexible and quick response to emergency conditions. The R2ML/H Series allows independent control of two form contacts for a variety of normally open and normally closed contact applications such as fan operation. elevator recall. door closure. and auxiliary notification.
EV8032TURBO-GEN3 DVR
Epcom Hybrid DVR: Supports 8MP (4K) 32CH TurboHD + 8CH IP POEÂ Video Output 4K/ (ONVIF NVR) 8 SATA Smart Sense Audio by Coaxitron (SUPER LIVE PLUS & SUPERCAM PLUS apps)
Fast Response Contact Monitoring Module – FRCME-M
The Hochiki DCP-FRCME-M Fast Response Contact Monitoring Modules are designed to be used with pull stations. water flow switches. and other applications requiring the monitoring of dry contact devices. The interrupt driven Digital Communications Protocol (DCP) combines maximum communication reliability and fast response to emergency conditions. The DCP-FRCMEM contact monitoring module does not require a separate 24 VDC power source.