No products in the cart.
$106.95Horn Strobe 24VDC. Multi Candela. Ceiling Mount. Red – HCC24CR
SKU: 0500-06100The HC Series is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available.
$101.94Intelligent Analog Photoelectric Smoke Sensor – ALO-V
SKU: 0200-11250The ALO-V (UL 268 7th edition listed) is a reliable. high quality Photoelectric Smoke Detector. It can be used in all open areas where Photoelectric Smoke Detectors are required. This detector is also suitable for monitoring smoke in HVAC ducts. The newly developed “multi-spectrum smoke categorization technology” detects smoldering and flaming fires fueled by traditional materials and polyurethane while reducing nuisance alarms.
*NOTE-7th Edition Bases required
The ASB7. ASBL7. SCI-B47. SCI-B67. YBN-NSA-47. and HSB-NSA-67 bases are compatible with the ALO-V.
$525.82Network Interface Card for FireNET® & FireNET® Plus – FN-4127-NIC
SKU: 0100-03190The FN-4127-NIC Network Interface Card allows for the expansion of up to 64 nodes (combination of FACP’s or annuciators) on a single FireNET network wide system. Using the Loop Explorer configuration software up to 64 nodes can be programmed to respond to in a variety ways-independently or system wide.
$42.16Pull Station. Single Action (Includes Glass Rod) – HPS-SAH
SKU: 0600-01200Hochiki America’s Models HPS series pull stations are available in six models. Each model is constructed of a solid die cast housing and comes in glossy red. The back switch plate is plated steel. The electrical switch is rated for 10 Amps @ 120 VDC normally open contact rating. All models are connected via terminal block connections.
$50.38Pull Station. Single Action with 211 Key (Includes Glass Rod) – HPS-SAK 211 KEY
SKU: 0600-01210Hochiki America’s Models HPS series pull stations are available in six models. Each model is constructed of a solid die cast housing and comes in glossy red. The back switch plate is plated steel. The electrical switch is rated for 10 Amps @ 120 VDC normally open contact rating. All models are connected via terminal block connections.
$21.68Sampling Tube 5 FT – STS-5
SKU: 0400-01590The Hochiki Duct Detector Sampling 5′ Sampling Tube
$325.22Serial Annunciator. Red for FireNET and FireNET Plus FACP – FNLCDSUS00R024
SKU: 0100-15670The FNLCDSUS00R024 is Serial Annunciator specifically designed for FireNET and FireNET Plus Fire Alarm Control Panels (FACP). This device enhances fire alarm system management by providing clear visual and audible notifications of alarm status. Its user-friendly interface and reliable performance make it an essential tool for fire safety monitoring in various environments.
$96.52Short Circuit Isolator – SCI
SKU: 0400-01079* Class A Configuration Wiring:
The DCP-SCI short circuit isolator should be located between any devices on the SLC loop. In the event of a short on the SLC loop. the two adjacent isolators (closest isolators to the left and right of the shorted section) will activate and their respective LED indicators will be turned on. All devices between the active short circuit isolators will lose communication. This will prevent entire loop failure. Upon removal of the short condition. the DCP-SCIs will automatically restore the entire loop to the normal operating state.
$99.20Single Action Addressable Manual Pull Station – DCP-AMS
SKU: 0600-01490The DCP-AMS are the Hochiki America series of addressable manual pull stations that provide a fast and practical means of manually initiating a fire alarm signal. Both single action and dual action manual pull stations are available. Resetting of the pull station requires either a 1/8″ hex key.
$325.22Single Loop Expander Card for FireNET® Plus – FNP-1127-SLC
SKU: 0100-05920The model FNP-1127-SLC Single SLC Loop Expander is a one loop expander board for the FireNET Plus FNP-1127E series control panel. The FNP-1127-SLC increases the loop capacity of the panel from 1 loop to 2 loops. doubling the loop capacity from 254 analog addressable points to 508. The loop expander board installs quickly. mounting to the back of the main control board. The FNP-1127-SLC has the same functionality as the built-in SLC loop on the FireNET Plus panel and utilizes Hochiki’s robust DCP loop protocol for highly reliable and fast alarm reporting. Shielded or twisted pair wiring for the SLC loop is not required.
$78.59Strobe 24VDC. Multi Candela. Wall Mount. Red – HES3-24WR
SKU: 0500-05940The HE Series is a low profile strobe and horn/strobe combination that offers dependable audible and visual alarms and the lowest current available.
$123.33Supervised Output Module Class A & B – SOM-A
SKU: 0400-01990The Class A Supervised Output Modules (DCP-SOM-A & SOM-AI) have been designed to provide application flexibility and quick response to emergency conditions. Flexibility is provided by a wide range of operating modes. including supporting multi-zone operations. and/or functions. up to 16 different modulation patterns and multi-state programming. The operating parameters for the DCP-SOM-A & -AI are maintained by the module and do not require individual communication with the control system during emergency conditions to operate.
$26.31Test Filter for SPB/SPC-24
SKU: 0700-01200The SPB/SPC-24 Filter is designed for use in applications requiring filtration in systems utilizing the SPB or SPC-24 models. This filter plays a crucial role in ensuring the efficiency and longevity of the equipment by removing contaminants and particulates from the fluid or air being processed.
$5,055.48Voice Evacuation System 100W. 1 Speaker Circuit. 120VAC. Red – Includes Digital Message Repeater. Temporal Pattern. Microphone. Power Supply and Battery Charger – EVAX-100R120
SKU: 0100-04068The Hochiki Evax Pre-Engineered Evacuation System Expander Panel
$4,212.90Voice Evacuation System 50W. 120VAC. Red – Includes Digital Message Repeater. Temporal Pattern. Microphone. Power Supply and Battery Charger – EVAX-50R120
SKU: 0100-04040The EVAX 50 includes all necessary features to provide an effective voice evacuation system. With the addition of zone splitters. remote microphone panels. and expander modules. the EVAX 50 can be custom configured to satisfy the needs of most applications.
Horn Strobe 24VDC. Multi Candela. Ceiling Mount. Red – HCC24CR
The HC Series is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available.
Intelligent Analog Photoelectric Smoke Sensor – ALO-V
The ALO-V (UL 268 7th edition listed) is a reliable. high quality Photoelectric Smoke Detector. It can be used in all open areas where Photoelectric Smoke Detectors are required. This detector is also suitable for monitoring smoke in HVAC ducts. The newly developed “multi-spectrum smoke categorization technology” detects smoldering and flaming fires fueled by traditional materials and polyurethane while reducing nuisance alarms.
*NOTE-7th Edition Bases required
The ASB7. ASBL7. SCI-B47. SCI-B67. YBN-NSA-47. and HSB-NSA-67 bases are compatible with the ALO-V.
Network Interface Card for FireNET® & FireNET® Plus – FN-4127-NIC
The FN-4127-NIC Network Interface Card allows for the expansion of up to 64 nodes (combination of FACP’s or annuciators) on a single FireNET network wide system. Using the Loop Explorer configuration software up to 64 nodes can be programmed to respond to in a variety ways-independently or system wide.
Pull Station. Single Action (Includes Glass Rod) – HPS-SAH
Hochiki America’s Models HPS series pull stations are available in six models. Each model is constructed of a solid die cast housing and comes in glossy red. The back switch plate is plated steel. The electrical switch is rated for 10 Amps @ 120 VDC normally open contact rating. All models are connected via terminal block connections.
Pull Station. Single Action with 211 Key (Includes Glass Rod) – HPS-SAK 211 KEY
Hochiki America’s Models HPS series pull stations are available in six models. Each model is constructed of a solid die cast housing and comes in glossy red. The back switch plate is plated steel. The electrical switch is rated for 10 Amps @ 120 VDC normally open contact rating. All models are connected via terminal block connections.
Serial Annunciator. Red for FireNET and FireNET Plus FACP – FNLCDSUS00R024
The FNLCDSUS00R024 is Serial Annunciator specifically designed for FireNET and FireNET Plus Fire Alarm Control Panels (FACP). This device enhances fire alarm system management by providing clear visual and audible notifications of alarm status. Its user-friendly interface and reliable performance make it an essential tool for fire safety monitoring in various environments.
Short Circuit Isolator – SCI
* Class A Configuration Wiring:
The DCP-SCI short circuit isolator should be located between any devices on the SLC loop. In the event of a short on the SLC loop. the two adjacent isolators (closest isolators to the left and right of the shorted section) will activate and their respective LED indicators will be turned on. All devices between the active short circuit isolators will lose communication. This will prevent entire loop failure. Upon removal of the short condition. the DCP-SCIs will automatically restore the entire loop to the normal operating state.
Single Action Addressable Manual Pull Station – DCP-AMS
The DCP-AMS are the Hochiki America series of addressable manual pull stations that provide a fast and practical means of manually initiating a fire alarm signal. Both single action and dual action manual pull stations are available. Resetting of the pull station requires either a 1/8″ hex key.
Single Loop Expander Card for FireNET® Plus – FNP-1127-SLC
The model FNP-1127-SLC Single SLC Loop Expander is a one loop expander board for the FireNET Plus FNP-1127E series control panel. The FNP-1127-SLC increases the loop capacity of the panel from 1 loop to 2 loops. doubling the loop capacity from 254 analog addressable points to 508. The loop expander board installs quickly. mounting to the back of the main control board. The FNP-1127-SLC has the same functionality as the built-in SLC loop on the FireNET Plus panel and utilizes Hochiki’s robust DCP loop protocol for highly reliable and fast alarm reporting. Shielded or twisted pair wiring for the SLC loop is not required.
Strobe 24VDC. Multi Candela. Wall Mount. Red – HES3-24WR
The HE Series is a low profile strobe and horn/strobe combination that offers dependable audible and visual alarms and the lowest current available.
Supervised Output Module Class A & B – SOM-A
The Class A Supervised Output Modules (DCP-SOM-A & SOM-AI) have been designed to provide application flexibility and quick response to emergency conditions. Flexibility is provided by a wide range of operating modes. including supporting multi-zone operations. and/or functions. up to 16 different modulation patterns and multi-state programming. The operating parameters for the DCP-SOM-A & -AI are maintained by the module and do not require individual communication with the control system during emergency conditions to operate.
Test Filter for SPB/SPC-24
The SPB/SPC-24 Filter is designed for use in applications requiring filtration in systems utilizing the SPB or SPC-24 models. This filter plays a crucial role in ensuring the efficiency and longevity of the equipment by removing contaminants and particulates from the fluid or air being processed.
Voice Evacuation System 100W. 1 Speaker Circuit. 120VAC. Red – Includes Digital Message Repeater. Temporal Pattern. Microphone. Power Supply and Battery Charger – EVAX-100R120
The Hochiki Evax Pre-Engineered Evacuation System Expander Panel
Voice Evacuation System 50W. 120VAC. Red – Includes Digital Message Repeater. Temporal Pattern. Microphone. Power Supply and Battery Charger – EVAX-50R120
The EVAX 50 includes all necessary features to provide an effective voice evacuation system. With the addition of zone splitters. remote microphone panels. and expander modules. the EVAX 50 can be custom configured to satisfy the needs of most applications.
Horn Strobe 24VDC. Multi Candela. Ceiling Mount. Red – HCC24CR
The HC Series is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available.
Intelligent Analog Photoelectric Smoke Sensor – ALO-V
The ALO-V (UL 268 7th edition listed) is a reliable. high quality Photoelectric Smoke Detector. It can be used in all open areas where Photoelectric Smoke Detectors are required. This detector is also suitable for monitoring smoke in HVAC ducts. The newly developed “multi-spectrum smoke categorization technology” detects smoldering and flaming fires fueled by traditional materials and polyurethane while reducing nuisance alarms.
*NOTE-7th Edition Bases required
The ASB7. ASBL7. SCI-B47. SCI-B67. YBN-NSA-47. and HSB-NSA-67 bases are compatible with the ALO-V.
Network Interface Card for FireNET® & FireNET® Plus – FN-4127-NIC
The FN-4127-NIC Network Interface Card allows for the expansion of up to 64 nodes (combination of FACP’s or annuciators) on a single FireNET network wide system. Using the Loop Explorer configuration software up to 64 nodes can be programmed to respond to in a variety ways-independently or system wide.
Pull Station. Single Action (Includes Glass Rod) – HPS-SAH
Hochiki America’s Models HPS series pull stations are available in six models. Each model is constructed of a solid die cast housing and comes in glossy red. The back switch plate is plated steel. The electrical switch is rated for 10 Amps @ 120 VDC normally open contact rating. All models are connected via terminal block connections.
Pull Station. Single Action with 211 Key (Includes Glass Rod) – HPS-SAK 211 KEY
Hochiki America’s Models HPS series pull stations are available in six models. Each model is constructed of a solid die cast housing and comes in glossy red. The back switch plate is plated steel. The electrical switch is rated for 10 Amps @ 120 VDC normally open contact rating. All models are connected via terminal block connections.
Serial Annunciator. Red for FireNET and FireNET Plus FACP – FNLCDSUS00R024
The FNLCDSUS00R024 is Serial Annunciator specifically designed for FireNET and FireNET Plus Fire Alarm Control Panels (FACP). This device enhances fire alarm system management by providing clear visual and audible notifications of alarm status. Its user-friendly interface and reliable performance make it an essential tool for fire safety monitoring in various environments.
Short Circuit Isolator – SCI
* Class A Configuration Wiring:
The DCP-SCI short circuit isolator should be located between any devices on the SLC loop. In the event of a short on the SLC loop. the two adjacent isolators (closest isolators to the left and right of the shorted section) will activate and their respective LED indicators will be turned on. All devices between the active short circuit isolators will lose communication. This will prevent entire loop failure. Upon removal of the short condition. the DCP-SCIs will automatically restore the entire loop to the normal operating state.
Single Action Addressable Manual Pull Station – DCP-AMS
The DCP-AMS are the Hochiki America series of addressable manual pull stations that provide a fast and practical means of manually initiating a fire alarm signal. Both single action and dual action manual pull stations are available. Resetting of the pull station requires either a 1/8″ hex key.
Single Loop Expander Card for FireNET® Plus – FNP-1127-SLC
The model FNP-1127-SLC Single SLC Loop Expander is a one loop expander board for the FireNET Plus FNP-1127E series control panel. The FNP-1127-SLC increases the loop capacity of the panel from 1 loop to 2 loops. doubling the loop capacity from 254 analog addressable points to 508. The loop expander board installs quickly. mounting to the back of the main control board. The FNP-1127-SLC has the same functionality as the built-in SLC loop on the FireNET Plus panel and utilizes Hochiki’s robust DCP loop protocol for highly reliable and fast alarm reporting. Shielded or twisted pair wiring for the SLC loop is not required.
Strobe 24VDC. Multi Candela. Wall Mount. Red – HES3-24WR
The HE Series is a low profile strobe and horn/strobe combination that offers dependable audible and visual alarms and the lowest current available.
Supervised Output Module Class A & B – SOM-A
The Class A Supervised Output Modules (DCP-SOM-A & SOM-AI) have been designed to provide application flexibility and quick response to emergency conditions. Flexibility is provided by a wide range of operating modes. including supporting multi-zone operations. and/or functions. up to 16 different modulation patterns and multi-state programming. The operating parameters for the DCP-SOM-A & -AI are maintained by the module and do not require individual communication with the control system during emergency conditions to operate.
Test Filter for SPB/SPC-24
The SPB/SPC-24 Filter is designed for use in applications requiring filtration in systems utilizing the SPB or SPC-24 models. This filter plays a crucial role in ensuring the efficiency and longevity of the equipment by removing contaminants and particulates from the fluid or air being processed.
Voice Evacuation System 100W. 1 Speaker Circuit. 120VAC. Red – Includes Digital Message Repeater. Temporal Pattern. Microphone. Power Supply and Battery Charger – EVAX-100R120
The Hochiki Evax Pre-Engineered Evacuation System Expander Panel
Voice Evacuation System 50W. 120VAC. Red – Includes Digital Message Repeater. Temporal Pattern. Microphone. Power Supply and Battery Charger – EVAX-50R120
The EVAX 50 includes all necessary features to provide an effective voice evacuation system. With the addition of zone splitters. remote microphone panels. and expander modules. the EVAX 50 can be custom configured to satisfy the needs of most applications.
Horn Strobe 24VDC. Multi Candela. Ceiling Mount. Red – HCC24CR
The HC Series is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available.
Intelligent Analog Photoelectric Smoke Sensor – ALO-V
The ALO-V (UL 268 7th edition listed) is a reliable. high quality Photoelectric Smoke Detector. It can be used in all open areas where Photoelectric Smoke Detectors are required. This detector is also suitable for monitoring smoke in HVAC ducts. The newly developed “multi-spectrum smoke categorization technology” detects smoldering and flaming fires fueled by traditional materials and polyurethane while reducing nuisance alarms.
*NOTE-7th Edition Bases required
The ASB7. ASBL7. SCI-B47. SCI-B67. YBN-NSA-47. and HSB-NSA-67 bases are compatible with the ALO-V.
Network Interface Card for FireNET® & FireNET® Plus – FN-4127-NIC
The FN-4127-NIC Network Interface Card allows for the expansion of up to 64 nodes (combination of FACP’s or annuciators) on a single FireNET network wide system. Using the Loop Explorer configuration software up to 64 nodes can be programmed to respond to in a variety ways-independently or system wide.
Pull Station. Single Action (Includes Glass Rod) – HPS-SAH
Hochiki America’s Models HPS series pull stations are available in six models. Each model is constructed of a solid die cast housing and comes in glossy red. The back switch plate is plated steel. The electrical switch is rated for 10 Amps @ 120 VDC normally open contact rating. All models are connected via terminal block connections.
Pull Station. Single Action with 211 Key (Includes Glass Rod) – HPS-SAK 211 KEY
Hochiki America’s Models HPS series pull stations are available in six models. Each model is constructed of a solid die cast housing and comes in glossy red. The back switch plate is plated steel. The electrical switch is rated for 10 Amps @ 120 VDC normally open contact rating. All models are connected via terminal block connections.
Serial Annunciator. Red for FireNET and FireNET Plus FACP – FNLCDSUS00R024
The FNLCDSUS00R024 is Serial Annunciator specifically designed for FireNET and FireNET Plus Fire Alarm Control Panels (FACP). This device enhances fire alarm system management by providing clear visual and audible notifications of alarm status. Its user-friendly interface and reliable performance make it an essential tool for fire safety monitoring in various environments.
Short Circuit Isolator – SCI
* Class A Configuration Wiring:
The DCP-SCI short circuit isolator should be located between any devices on the SLC loop. In the event of a short on the SLC loop. the two adjacent isolators (closest isolators to the left and right of the shorted section) will activate and their respective LED indicators will be turned on. All devices between the active short circuit isolators will lose communication. This will prevent entire loop failure. Upon removal of the short condition. the DCP-SCIs will automatically restore the entire loop to the normal operating state.
Single Action Addressable Manual Pull Station – DCP-AMS
The DCP-AMS are the Hochiki America series of addressable manual pull stations that provide a fast and practical means of manually initiating a fire alarm signal. Both single action and dual action manual pull stations are available. Resetting of the pull station requires either a 1/8″ hex key.
Single Loop Expander Card for FireNET® Plus – FNP-1127-SLC
The model FNP-1127-SLC Single SLC Loop Expander is a one loop expander board for the FireNET Plus FNP-1127E series control panel. The FNP-1127-SLC increases the loop capacity of the panel from 1 loop to 2 loops. doubling the loop capacity from 254 analog addressable points to 508. The loop expander board installs quickly. mounting to the back of the main control board. The FNP-1127-SLC has the same functionality as the built-in SLC loop on the FireNET Plus panel and utilizes Hochiki’s robust DCP loop protocol for highly reliable and fast alarm reporting. Shielded or twisted pair wiring for the SLC loop is not required.
Strobe 24VDC. Multi Candela. Wall Mount. Red – HES3-24WR
The HE Series is a low profile strobe and horn/strobe combination that offers dependable audible and visual alarms and the lowest current available.
Supervised Output Module Class A & B – SOM-A
The Class A Supervised Output Modules (DCP-SOM-A & SOM-AI) have been designed to provide application flexibility and quick response to emergency conditions. Flexibility is provided by a wide range of operating modes. including supporting multi-zone operations. and/or functions. up to 16 different modulation patterns and multi-state programming. The operating parameters for the DCP-SOM-A & -AI are maintained by the module and do not require individual communication with the control system during emergency conditions to operate.
Test Filter for SPB/SPC-24
The SPB/SPC-24 Filter is designed for use in applications requiring filtration in systems utilizing the SPB or SPC-24 models. This filter plays a crucial role in ensuring the efficiency and longevity of the equipment by removing contaminants and particulates from the fluid or air being processed.
Voice Evacuation System 100W. 1 Speaker Circuit. 120VAC. Red – Includes Digital Message Repeater. Temporal Pattern. Microphone. Power Supply and Battery Charger – EVAX-100R120
The Hochiki Evax Pre-Engineered Evacuation System Expander Panel
Voice Evacuation System 50W. 120VAC. Red – Includes Digital Message Repeater. Temporal Pattern. Microphone. Power Supply and Battery Charger – EVAX-50R120
The EVAX 50 includes all necessary features to provide an effective voice evacuation system. With the addition of zone splitters. remote microphone panels. and expander modules. the EVAX 50 can be custom configured to satisfy the needs of most applications.
