No products in the cart.
$120.65Conventional Zone Input Module for 4″Box. Class A & B – CZM
SKU: 0400-01840The Hochiki Conventional Zone Module (DCP-CZM) is designed for use on an analog addressable Fire Alarm system. Up to 127 devices can be placed on a single SLC loop. The device address is uniquely stored on an onboard. The module allows the panel to interface and monitor two-wire conventional detectors or pull stations. Each DCP-CZM transmits the status on one zone of devices (25 maximum per zone) back to the panel.
$134.06Dual Input Monitor Module for 4″ Box. Class B – DIMM
SKU: 0400-01850The Hochiki Dual Input Monitor Module (DIMM) is designed for use on a UL listed Fire Alarm Control Panel. It provides two independent contact monitoring circuits while only utilizing one address on the SLC loop. Up to 127 devices can be placed on a single SLC loop. The device address is uniquely stored on an onboard.
$115.29Dual Relay Module 2 AMPS – R2ML
SKU: 0400-02050The Dual Relay Modules (R2ML/H Series) have been designed to provide flexible and quick response to emergency conditions. The R2ML/H Series allows independent control of two form contacts for a variety of normally open and normally closed contact applications such as fan operation. elevator recall. door closure. and auxiliary notification.
$61.67Fast Response Contact Monitoring Module – FRCME-M
SKU: 0400-02580The Hochiki DCP-FRCME-M Fast Response Contact Monitoring Modules are designed to be used with pull stations. water flow switches. and other applications requiring the monitoring of dry contact devices. The interrupt driven Digital Communications Protocol (DCP) combines maximum communication reliability and fast response to emergency conditions. The DCP-FRCMEM contact monitoring module does not require a separate 24 VDC power source.
$77.75Fast Response Contact Monitoring Module with pigtails – FRCME-P
SKU: 0400-01741The Hochiki DCP-FRCME-M Fast Response Contact Monitoring Modules are designed to be used with pull stations. water flow switches. and other applications requiring the monitoring of dry contact devices. The interrupt driven Digital Communications Protocol (DCP) combines maximum communication reliability and fast response to emergency conditions. The DCP-FRCMEM contact monitoring module does not require a separate 24 VDC power source.
$96.52Short Circuit Isolator – SCI
SKU: 0400-01079* Class A Configuration Wiring:
The DCP-SCI short circuit isolator should be located between any devices on the SLC loop. In the event of a short on the SLC loop. the two adjacent isolators (closest isolators to the left and right of the shorted section) will activate and their respective LED indicators will be turned on. All devices between the active short circuit isolators will lose communication. This will prevent entire loop failure. Upon removal of the short condition. the DCP-SCIs will automatically restore the entire loop to the normal operating state.
$123.33Supervised Output Module Class A & B – SOM-A
SKU: 0400-01990The Class A Supervised Output Modules (DCP-SOM-A & SOM-AI) have been designed to provide application flexibility and quick response to emergency conditions. Flexibility is provided by a wide range of operating modes. including supporting multi-zone operations. and/or functions. up to 16 different modulation patterns and multi-state programming. The operating parameters for the DCP-SOM-A & -AI are maintained by the module and do not require individual communication with the control system during emergency conditions to operate.
Conventional Zone Input Module for 4″Box. Class A & B – CZM
The Hochiki Conventional Zone Module (DCP-CZM) is designed for use on an analog addressable Fire Alarm system. Up to 127 devices can be placed on a single SLC loop. The device address is uniquely stored on an onboard. The module allows the panel to interface and monitor two-wire conventional detectors or pull stations. Each DCP-CZM transmits the status on one zone of devices (25 maximum per zone) back to the panel.
Dual Input Monitor Module for 4″ Box. Class B – DIMM
The Hochiki Dual Input Monitor Module (DIMM) is designed for use on a UL listed Fire Alarm Control Panel. It provides two independent contact monitoring circuits while only utilizing one address on the SLC loop. Up to 127 devices can be placed on a single SLC loop. The device address is uniquely stored on an onboard.
Dual Relay Module 2 AMPS – R2ML
The Dual Relay Modules (R2ML/H Series) have been designed to provide flexible and quick response to emergency conditions. The R2ML/H Series allows independent control of two form contacts for a variety of normally open and normally closed contact applications such as fan operation. elevator recall. door closure. and auxiliary notification.
Fast Response Contact Monitoring Module – FRCME-M
The Hochiki DCP-FRCME-M Fast Response Contact Monitoring Modules are designed to be used with pull stations. water flow switches. and other applications requiring the monitoring of dry contact devices. The interrupt driven Digital Communications Protocol (DCP) combines maximum communication reliability and fast response to emergency conditions. The DCP-FRCMEM contact monitoring module does not require a separate 24 VDC power source.
Fast Response Contact Monitoring Module with pigtails – FRCME-P
The Hochiki DCP-FRCME-M Fast Response Contact Monitoring Modules are designed to be used with pull stations. water flow switches. and other applications requiring the monitoring of dry contact devices. The interrupt driven Digital Communications Protocol (DCP) combines maximum communication reliability and fast response to emergency conditions. The DCP-FRCMEM contact monitoring module does not require a separate 24 VDC power source.
Short Circuit Isolator – SCI
* Class A Configuration Wiring:
The DCP-SCI short circuit isolator should be located between any devices on the SLC loop. In the event of a short on the SLC loop. the two adjacent isolators (closest isolators to the left and right of the shorted section) will activate and their respective LED indicators will be turned on. All devices between the active short circuit isolators will lose communication. This will prevent entire loop failure. Upon removal of the short condition. the DCP-SCIs will automatically restore the entire loop to the normal operating state.
Supervised Output Module Class A & B – SOM-A
The Class A Supervised Output Modules (DCP-SOM-A & SOM-AI) have been designed to provide application flexibility and quick response to emergency conditions. Flexibility is provided by a wide range of operating modes. including supporting multi-zone operations. and/or functions. up to 16 different modulation patterns and multi-state programming. The operating parameters for the DCP-SOM-A & -AI are maintained by the module and do not require individual communication with the control system during emergency conditions to operate.
Conventional Zone Input Module for 4″Box. Class A & B – CZM
The Hochiki Conventional Zone Module (DCP-CZM) is designed for use on an analog addressable Fire Alarm system. Up to 127 devices can be placed on a single SLC loop. The device address is uniquely stored on an onboard. The module allows the panel to interface and monitor two-wire conventional detectors or pull stations. Each DCP-CZM transmits the status on one zone of devices (25 maximum per zone) back to the panel.
Dual Input Monitor Module for 4″ Box. Class B – DIMM
The Hochiki Dual Input Monitor Module (DIMM) is designed for use on a UL listed Fire Alarm Control Panel. It provides two independent contact monitoring circuits while only utilizing one address on the SLC loop. Up to 127 devices can be placed on a single SLC loop. The device address is uniquely stored on an onboard.
Dual Relay Module 2 AMPS – R2ML
The Dual Relay Modules (R2ML/H Series) have been designed to provide flexible and quick response to emergency conditions. The R2ML/H Series allows independent control of two form contacts for a variety of normally open and normally closed contact applications such as fan operation. elevator recall. door closure. and auxiliary notification.
Fast Response Contact Monitoring Module – FRCME-M
The Hochiki DCP-FRCME-M Fast Response Contact Monitoring Modules are designed to be used with pull stations. water flow switches. and other applications requiring the monitoring of dry contact devices. The interrupt driven Digital Communications Protocol (DCP) combines maximum communication reliability and fast response to emergency conditions. The DCP-FRCMEM contact monitoring module does not require a separate 24 VDC power source.
Fast Response Contact Monitoring Module with pigtails – FRCME-P
The Hochiki DCP-FRCME-M Fast Response Contact Monitoring Modules are designed to be used with pull stations. water flow switches. and other applications requiring the monitoring of dry contact devices. The interrupt driven Digital Communications Protocol (DCP) combines maximum communication reliability and fast response to emergency conditions. The DCP-FRCMEM contact monitoring module does not require a separate 24 VDC power source.
Short Circuit Isolator – SCI
* Class A Configuration Wiring:
The DCP-SCI short circuit isolator should be located between any devices on the SLC loop. In the event of a short on the SLC loop. the two adjacent isolators (closest isolators to the left and right of the shorted section) will activate and their respective LED indicators will be turned on. All devices between the active short circuit isolators will lose communication. This will prevent entire loop failure. Upon removal of the short condition. the DCP-SCIs will automatically restore the entire loop to the normal operating state.
Supervised Output Module Class A & B – SOM-A
The Class A Supervised Output Modules (DCP-SOM-A & SOM-AI) have been designed to provide application flexibility and quick response to emergency conditions. Flexibility is provided by a wide range of operating modes. including supporting multi-zone operations. and/or functions. up to 16 different modulation patterns and multi-state programming. The operating parameters for the DCP-SOM-A & -AI are maintained by the module and do not require individual communication with the control system during emergency conditions to operate.
Conventional Zone Input Module for 4″Box. Class A & B – CZM
The Hochiki Conventional Zone Module (DCP-CZM) is designed for use on an analog addressable Fire Alarm system. Up to 127 devices can be placed on a single SLC loop. The device address is uniquely stored on an onboard. The module allows the panel to interface and monitor two-wire conventional detectors or pull stations. Each DCP-CZM transmits the status on one zone of devices (25 maximum per zone) back to the panel.
Dual Input Monitor Module for 4″ Box. Class B – DIMM
The Hochiki Dual Input Monitor Module (DIMM) is designed for use on a UL listed Fire Alarm Control Panel. It provides two independent contact monitoring circuits while only utilizing one address on the SLC loop. Up to 127 devices can be placed on a single SLC loop. The device address is uniquely stored on an onboard.
Dual Relay Module 2 AMPS – R2ML
The Dual Relay Modules (R2ML/H Series) have been designed to provide flexible and quick response to emergency conditions. The R2ML/H Series allows independent control of two form contacts for a variety of normally open and normally closed contact applications such as fan operation. elevator recall. door closure. and auxiliary notification.
Fast Response Contact Monitoring Module – FRCME-M
The Hochiki DCP-FRCME-M Fast Response Contact Monitoring Modules are designed to be used with pull stations. water flow switches. and other applications requiring the monitoring of dry contact devices. The interrupt driven Digital Communications Protocol (DCP) combines maximum communication reliability and fast response to emergency conditions. The DCP-FRCMEM contact monitoring module does not require a separate 24 VDC power source.
Fast Response Contact Monitoring Module with pigtails – FRCME-P
The Hochiki DCP-FRCME-M Fast Response Contact Monitoring Modules are designed to be used with pull stations. water flow switches. and other applications requiring the monitoring of dry contact devices. The interrupt driven Digital Communications Protocol (DCP) combines maximum communication reliability and fast response to emergency conditions. The DCP-FRCMEM contact monitoring module does not require a separate 24 VDC power source.
Short Circuit Isolator – SCI
* Class A Configuration Wiring:
The DCP-SCI short circuit isolator should be located between any devices on the SLC loop. In the event of a short on the SLC loop. the two adjacent isolators (closest isolators to the left and right of the shorted section) will activate and their respective LED indicators will be turned on. All devices between the active short circuit isolators will lose communication. This will prevent entire loop failure. Upon removal of the short condition. the DCP-SCIs will automatically restore the entire loop to the normal operating state.
Supervised Output Module Class A & B – SOM-A
The Class A Supervised Output Modules (DCP-SOM-A & SOM-AI) have been designed to provide application flexibility and quick response to emergency conditions. Flexibility is provided by a wide range of operating modes. including supporting multi-zone operations. and/or functions. up to 16 different modulation patterns and multi-state programming. The operating parameters for the DCP-SOM-A & -AI are maintained by the module and do not require individual communication with the control system during emergency conditions to operate.